Preliminary Checks; Operating Position - Riello RS5 Installation, Use And Maintenance Instructions

5.4

Preliminary checks

Control of the supply
After removing all the packaging, check the integ-
rity of the contents.
In the event of doubt, do not use the burner; con-
CAUTION
tact the supplier.
The packaging elements (cardboard box, clips,
plastic bags, etc.) must not be abandoned as they
are potential sources of danger and pollution; they
should be collected and disposed of in the appro-
priate places.
Control of burner characteristics
Check the identification label of the burner (Fig. 7), showing:
A the burner model;
B the data of the burner's possible minimum and maximum
output (see Firing rate);
C the cryptographic year of manufacture;
D the serial number;
E the data for electrical supply and the protection level;
F the electrical power consumption;
G the types of gas used and the relative supply pressures;
Warning: the burner output must be within the boiler's firing
rate.
5.5

Operating position

 The burner is set up to operate only in posi-
tions 1, 2, 3, 5, 6 and 7 (Fig. 8).
 Installation 1 is preferable, as it is the only
one that allows the maintenance operations
WARNING
as described in this manual.
 The installation layout illustrated in position 5
is only possible using the "MULTI-BLOC rota-
tion kit", to be ordered separately.
1 2
5 6
Installation
The figure of the label (Fig. 7) is indicative.
Some of the data may be arranged in a different
position.
WARNING
R.H.E.
X
20191133
A burner label that has been tampered with, re-
moved or is missing, along with anything else that
prevents the definite identification of the burner
makes any installation or maintenance work diffi-
WARNING
cult.
 Any other position could compromise the cor-
 Installation 4 are forbidden for safety rea-
DANGER
3
7
15 GB
A
D C
E
G B
G B
G B
rect operation of the appliance.
sons.
4
D4450
F
Fig. 7
Fig. 8
20198379