Battery - Replace - Perkins 402F-05 Operation And Maintenance Manual

Industrial engines
Hide thumbs Also See for 402F-05:
Table of Contents

Advertisement

SEBU9064-08
Illustration 41
Typical example
1. Loosen adjusting bolt (1) and mounting bolt and
nut (2). Loosen bolt (3).
2. Push the alternator (4) towards the engine.
Note: If the belt is to be reused, mark the belt in order
to show direction of rotation.
Illustration 42
Typical example
3. Remove the belt (5).
4. Install new belt (5) and adjust the alternator to the
required tension.
5. Tighten bolt (1) and tighten bolt and nut (2).
Tighten bolt (3). Tighten all bolts and nuts to a
torque of 25 N·m (221 lb in).
Refer to this Operation and Maintenance Manual,
"Alternator and Fan Belts - Inspect/Adjust" for the
tension of the belt.

Battery - Replace

Batteries give off combustible gases which can
explode. A spark can cause the combustible
gases to ignite. This can result in severe personal
injury or death.
Ensure proper ventilation for batteries that are in
an enclosure. Follow the proper procedures in or-
g03383666
der to help prevent electrical arcs and/or sparks
near batteries. Do not smoke when batteries are
serviced.
The battery cables or the batteries should not be
removed with the battery cover in place. The bat-
tery cover should be removed before any servic-
ing is attempted.
Removing the battery cables or the batteries with
the cover in place may cause a battery explosion
resulting in personal injury.
1. Switch the engine to the OFF position. Remove all
electrical loads.
2. Turn off any battery chargers. Disconnect any
battery chargers.
3. The NEGATIVE "-" cable connects the NEGATIVE
"-" battery terminal to the NEGATIVE "-" terminal
on the starting motor. Disconnect the cable from
the NEGATIVE "-" battery terminal.
4. The POSITIVE "+" cable connects the POSITIVE
"+" battery terminal to the POSITIVE "+" terminal
on the starting motor. Disconnect the cable from
the POSITIVE "+" battery terminal.
Note: Always recycle a battery. Never discard a
g03383667
battery. Dispose of used batteries to an appropriate
recycling facility.
5. Remove the used battery.
6. Install the new battery.
71
Maintenance Section
Battery - Replace
i02322315

Advertisement

Table of Contents
loading

This manual is also suitable for:

403f-07403f-11403f-15

Table of Contents