Blending Chart; Care And Maintenance; Ordering Replacement Parts - Ninja PROFESSIONAL BLENDER 1000 Owner's Manual

ASSEMBLY & USE OF THE PITCHER – CONT.
8 Holding the lid by the handle in the upright position, place it on
top of the pitcher, aligning the arrow ( ) located on the lid with
the arrow ( ) located on the pitcher's handle. Press the handle
down until you hear a click.
9 Select the speed according to your blending requirements*:
• Use the LOW setting for processing and mixing.
• Use the SMOOTHIE setting for intelligent preset program to
combine unique blending and pausing patterns that do the
work for you.
• Use the HIGH setting for pureeing and liquefying.
• Use the PULSE button for controlled chopping and processing.
*See Blending Chart.
NOTE
• Pulse ingredients for even chopping by pressing down in short intervals
10 When ingredients have reached your desired consistency, stop
the appliance by pressing the power button ( ) and wait for the
Stacked Blade Assembly to stop turning.
11 To remove the lid, press the release button on the lid, pull the
lid handle up to a 90° angle, and lift the lid off. Turn the pitcher
counterclockwise and then lift off the base.
12 Open the pour spout cap and use the spout to empty liquid
contents.
For thicker consistencies, first remove the lid by pressing the
release button and pulling the lid handle up to a 90° angle to lift lid
off the pitcher. Then, carefully remove the Stacked Blade Assembly
by the top of the shaft. Place Stacked Blade Assembly away from
the work area to avoid accidental contact. Finally, empty contents
from the pitcher.
13 Make sure the unit is unplugged when not in use.
ninjakitchen.com

BLENDING CHART

BUTTON FUNCTION
POWER
On/Off
Processing
LOW
& Mixing
AUTO-IQ
Smoothie Making
SMOOTHIE
HIGH Pureeing & Liquefying
Controlled Processing &
PULSE
Bursts of Power
* When blending soups and sauces, make sure they're cooled to room temperature first. Ninja® containers are not
intended for hot blending.
CARE & MAINTENANCE
CLEANING
1 Separate all parts from each other.
2 Hand-Washing: Wash the pitcher, lid, and Stacked Blade Assembly in warm, soapy water. When
washing the Stacked Blade Assembly, use a dishwashing utensil with a handle to avoid direct hand
contact with blades. Handle blade assembly with care to avoid contact with sharp edges. Rinse
and air-dry thoroughly.
Dishwasher: The pitcher, lid, and Stacked Blade Assembly are all dishwasher safe. The lid and
Stacked Blade Assembly are top-rack dishwasher safe. Ensure the Stacked Blade Assembly is
removed from the pitcher before placing in the dishwasher.
3 Wipe the motor base clean with a damp cloth.
STORING
1 Store the Ninja® Professional 1000 upright with the Stacked Blade Assembly inside the pitcher with
the lid secured on top. Do not place anything on top. Loosely wrap the power cord around the cord
storage hook in the back of the unit.

ORDERING REPLACEMENT PARTS

To order additional parts and accessories, visit ninjaaccessories.com or contact Customer Service
at 1-877-646-5288.
USE
Always turn appliance off when not in use.
Use to mix thin batters, gravies, and marinades; beat
eggs; puree cooked foods and uncooked fruits; and chop
vegetables for dips and salsa.
Use to combine your favorite fresh or frozen
ingredients, liquids, and powders to create smoothies
and protein shakes.
Use to mix smoothies, frappes, liquefy thick mixtures
and blend whole fruits and vegetables.
Use to control chopping and processing.
ninjakitchen.com