Getting Started; Before First Use - Ninja PROFESSIONAL BLENDER 1000 Owner's Manual

GETTING STARTED

The Ninja® Professional Blender 1000 is a high powered kitchen tool that is perfect for ice crushing,
blending, pureeing and controlled processing. Create all of your favorite recipes quickly and
easily with just one touch of a button. For best results, be sure to carefully read all the instructions
contained in the manual before using this appliance.
A Lid with Locking Handle
B Locking Handle Release Button
C Pouring Spout with Cap
D Pitcher
E Stacked Blade Assembly
G
I
E
H

BEFORE FIRST USE

IMPORTANT
• Review all warnings at the beginning of this Owner's Guide before proceeding.
1 Remove all packaging material and labels from the appliance. Separate all parts from each other.
2 Wash the lid, pitcher, and Stacked Blade Assembly in warm, soapy water. When washing the blade
assembly, use a dishwashing utensil with a handle to avoid direct hand contact with blades.
3 Handle blade assembly with care to avoid contact with sharp edges. Rinse and airdry thoroughly.
4 The pitcher and Stacked Blade Assembly are dishwasher safe. It is recommended the lid and Stacked
Blade Assembly be placed on the top rack. Ensure the Stacked Blade Assembly is removed from the
pitcher before placing in the dishwasher.
5 Wipe the motor base clean with a damp cloth.
PLEASE KEEP THESE IMPORTANT SAFEGUARDS IN MIND WHEN USING THE APPLIANCE:
Make sure the motor base is plugged in for use.
NEVER add ingredients into the container before placing the Blade Assembly in first.
DO NOT attempt to operate the appliance without the lid on.
NEVER run the appliance empty.
Appliance accessories are not intended to be used in the microwave, as it may result in damage
to the accessories.
ninjakitchen.com
F Gear Shaft
G Motor Base
(power cord and cord storage not shown)
H Control Panel
I Nonslip Bottom
D
A
C
F
ASSEMBLY & USE OF THE PITCHER
IMPORTANT
• Review all warnings at the beginning of this Owner's Guide before proceeding.
1 Place the motor base on a clean, dry, level surface such as a
counter or tabletop.
2 Align and lower the pitcher onto the motor base.
3 Rotate the pitcher clockwise until it locks in place. You will hear a
click when the lock is engaged.
4 The pitcher can be placed on the motor base two ways; the handle
can be on the front right corner or the front left corner.
5 Holding the Stacked Blade Assembly by the top of the shaft, place
it onto the drive gear inside the pitcher. Ensure the Stacked Blade
Assembly is seated properly and is standing upright.
NOTE
• The Stacked Blade Assembly will fit loosely on the drive gear.
6 Add the ingredients to the pitcher, making sure they do not exceed the highest measured marking
line on the side of the pitcher.
NOTES
• If you need to add additional ingredients while the appliance is processing, open the pour spout
cap and pour the ingredients in through the opening.
• When blending any kind of liquids, such as mixtures of any drinks or smoothies, do not exceed the
"Max Liquid" mark (64 ounces) on the pitcher.
7 Plug the power cord into the electrical outlet and press the power button ( ).
IMPORTANT
As a safety feature, the power button ( ) will flash and the motor will not work if the pitcher and lid
are not installed correctly. When the pitcher and lid are installed properly, the power button ( ) will
be solid, indicating the blender is ready for use.
ninjakitchen.com