Yaesu FTM-500DR Instruction Manual page 15

4. Rotate the FUNC knob to select one of [C1] to [C5],
then press the FUNC knob.
The name of the currently connected node or room is
added to the registered node and room lists.
5. Press the [BACK] key.
The screen returns to the list.
z Connecting to registered nodes or rooms
1. Rotate the FUNC knob to select [SEARCH & DI-
RECT], then press the FUNC knob.
The category list is displayed.
2. Rotate the FUNC knob to select one of [C1] to [C5],
then press the FUNC knob.
• Displays the node and room lists.
• On room listings, the number of nodes connected to
each room appears at the right side.
3. Rotate the FUNC knob to a node or room, then press
the FUNC knob.
Rotate the FUNC knob to select the node or room to
connect, then press PTT to switch to establish a con-
nection.
The items are listed in the order of the activity number,
or the access history (as selected from [65 SEARCH
SETUP] in setting mode).
• If connection is successful, the menu list of the con-
nected node or room appears.
• If connection is not successful, an error message
appears, and the screen returns to the list of nodes
and rooms.
15
JA1YOE-ROOM12345
C1:TOKYO
C2:FISHING
C3:
C4:
C5:
JQ1YBG-ND Shinagawa-
SEARCH & DIRECT
CATEGORY
ALL
SEARCH & DIRECT
C1:TOKYO
C2:FISHING
C3:
C4:
C1:TOKYO
CQ-JAPAN
JA1YOE-TKY-ROOM
CQ-JAPAN
EMERGENCY
NEWS STATION
LOCAL NEWS
INT NEWS
2
123
42
123