Yaesu FTM-500DR Instruction Manual page 11

C4fm/fm 144/430 mhz dual band digital transceiver

Hide thumbs Also See for FTM-500DR:

Table of Contents

z Searching by node or room name

1. While displaying the local node, rotate the FUNC knob

to select [SEARCH & DIRECT], then press the FUNC

knob.

The category list is displayed.

2. Rotate the FUNC knob to select [SEARCH & DIRECT],

then press the FUNC knob.

The character input screen is displayed.

3. Enter all or part of the room or node name, then press

and hold the FUNC knob.

If connection destinations with the first part of the name matching the partial entry

are found, they will be listed.

• If there are no connection destinations matching the partial entry, "No Data" ap-

pears and the screen returns to the character input screen.

• If the entered name is found, the transceiver establishes connection immediately.

• The screen displays the room list search results followed by the node list search

results.

• On the room search results, the number of nodes connected to each room ap-

pears on the right side.

4. Rotate the FUNC knob to select the node or room to

connect, then press the FUNC knob.

• Rotate the FUNC to select the node or room to con-

nect, then press PTT to initiate a connection.

• Once connection is successfully established, the

menu list of the connected node (room) will appear.

• If connection is unsuccessful, an error message appears and the screen returns to

the list of nodes and rooms.

JQ1YBG-ND Shinagawa-

SEARCH & DIRECT

Table of Contents

Ftm-500de