To Pause Timing; To Reset Elapsed Time Measurement To Zero - Casio 3556 EN User Manual

To pause timing

1. Press D.
This stops elapsed time measurement in the upper display.
• Elapsed time measurement in the lower display continues.
2. To resume elapsed time measurement in the upper display, press D again.
When the preset event time is reached
• The watch will sound an alarm when the elapsed time measurement in the lower
display (total elapsed time since timing started) reaches the preset event time.
• Elapsed time measurement continues to be performed even after the preset event
time is reached.

To reset elapsed time measurement to zero

1. Press D. This stops elapsed time measurement in the upper display.
• Elapsed time measurement in the lower display continues.
2. Hold down A until the initial Stopwatch Mode screen appears.
EN-18