Problem
The player does not respond to
the Remote Control
Buttons do not work
Player does not respond to some
operating commands during playback.
DVD Player cannot read
CDs/DVDs
Menu items cannot be selected
Unable to play DivX movies
No sound during DivX movies playback
01-30 MDV430_Eng1
Solution
– Aim the Remote Control directly at the sensor
on the front of the player.
– Reduce the distance to the player.
– Replace the batteries in the Remote Control.
– Re-insert the batteries with their polarities (+/–
signs) as indicated.
– To completely reset the player, unplug the AC
cord from the AC outlet for 5-10 seconds.
– Operations may not be permitted by the disc.
Refer to the instructions of the disc jacket.
– Use a commonly available cleaning CD/DVD to
clean the lens before sending the DVD Player for
repair.
– Press STOP twice before selecting System Menu.
– Depending on the disc availability, some menu items
cannot be selected.
– Check that the DivX file is encoded with DivX 3.11,
4.x and 5.x encoder.
– The audio codec may not be supported by the DVD
player.
29
Troubleshooting
3139 246 14551
28/09/2004, 2:26 PM
29