Basic Playback Controls; Pausing Playback; Selecting Track/Chapter; Resuming Playback From The Last Stopped - Magnavox MDV430 User Manual

Disc Operations

Basic playback controls

Unless otherwise stated, all operations
described are based on the use of
Remote Control.

Pausing playback

(DVD/VCD/CD/MP3)
1
During playback, press PAUSE ;.
➜
Playback will pause and sound will be
muted.
2
Press PAUSE ; again to select the next
picture frame.
3
To return to normal playback, press
PLAY B.

Selecting track/chapter

(DVD/VCD/CD)
1
Press T briefly during playback to go to
the next chapter/track
2
Press S to go to the previous track
(VCD/CD) or return to the beginning of
the current chapter (DVD).
G
Press S twice briefly to step back to
the previous chapter (DVD).
3
To go directly to any chapter/track, enter
the chapter/track number using the
numerical keys (0-9).
Resuming playback from the last
stopped point (DVD/VCD/CD)
Resume playback of the last five discs, even
if the disc was removed from the Player.
1
Load one of the last five discs.
➜
"LOAD" appears.
2
Press PLAY B and the disc will play from
the last point.
3
Press STOP 9 to cancel the resume mode.
Helpful Hint:
– To memorise the last stop point, press
OPEN/CLOSE or STANDBY-ON button during
playback.
The operating features described here might not be possible for certain discs. Always refer
TIPS:
to the instructions supplied with the discs.
18
01-30 MDV430_Eng1
Zoom (DVD/VCD/JPEG)
Zooming allows you to enlarge or reduce
the video image during playback.
1
Press ZOOM repeatedly to increase and
decrease the playback video image.
2
Press 1 2 3 4 to pan across the TV
screen.
Repeat (DVD/VCD)
G
Press REPEAT continuously to choose a
Repeat mode during playback.
REPEAT CHAPTER (DVD)
– to repeat playback of the current
chapter.
REPEAT TITLE (DVD)
– to repeat playback of the current
title.
REPEAT SINGLE (VCD)
– to repeat playback of the current
track.
REPEAT ALL (VCD)
– to repeat playback of all the disc.
REPEAT OFF (DVD/VCD)
– to cancel the repeat mode.
Helpful Hint:
– REPEAT function is not available for VCD
2.0 when PCB is on.
Repeat A-B (DVD/VCD/CD)
1
Press REPEAT A-B at your chosen
starting point.
2
Press REPEAT A-B again at your chosen
end point.
➜
The section A and B can be set only
within the same chapter/track.
➜
The section will now repeat continuously.
3
To exit the sequence, press REPEAT A-B.
18
3139 246 14551
28/09/2004, 2:26 PM