Page 2
Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once, or register online at www.magnavox.com/usasupport to ensure:...
Page 3
Class II equipment symbol This symbol indicates that the unit has a double insulation system 01-37 MDV435_436_37_eng_RC2.indd 3 01-37 MDV435_436_37_eng_RC2.indd 3 2006-04-27 5:08:00 PM 2006-04-27 5:08:00 PM...
Page 4
01-37 MDV435_436_37_eng_RC2.indd 4 01-37 MDV435_436_37_eng_RC2.indd 4 WARNING To reduce risk of fi re or electric shock, do not expose this appliance to rain or moisture. Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure.
(box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your DVD player consists of materials which can be recycled and reused if disassembled by a specialised company. Please observe the local regulations...
Page 7
ATTENTION L’utilisation des commandes ou réglages ou le non-respect des procédures ci- incluses peuvent se traduire par une exposition dangereuse à l’irradiation. ATENCIÓN El uso de mando o ajustes o la ejecucción de métodos que no sean los aquí descritos puede ocasionar peligro de exposición a radiación.
Contents Care and Safety Information Setup ... 10 Cleaning discs ... 10 General Information Accessories supplied ... 11 Region codes ... 11 Connections Connecting to television ... 12~13 Using Composite Video sockets (CVBS) ... 12 Using Component Video sockets (YPbPr) ... 12 Using an accessory RF modulator ...
Page 9
Special DVD Features ...24~25 Playing a Title ... 24 Camera Angle ... 24 Changing the Audio Language ...25 Subtitle ...25 Special VCD and SVCD Feature ... 25 Playback Control (PBC) ...25 Playing a DivX disc (optional) Playing MP3/JPEG/Kodak Picture CD ... 26 General Operation ...26 Playback selection ...26 Repeat ...26...
Care and Safety Information DANGER! High voltage! Do not open the device. You run the risk of getting an electric shock. The machine does not contain any user-serviceable parts. Please leave all maintenance work to qualifi ed personnel. Setup Finding a suitable location –...
01-37 MDV435_436_37_eng_RC2.indd 11 01-37 MDV435_436_37_eng_RC2.indd 11 General Information Region codes This DVD player is designed to support the Region Management System. Check the regional code number on the disc package. If the number does not match the player’s region number (see table below), the player may be unable to playback the disc.
(cable supplied). To hear sound of this DVD player through your TV, use the audio cables (white/red) to connect AUDIO OUT (L/ R) sockets of the DVD player to the corresponding AUDIO IN sockets on the television (cable supplied). TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.
RF jack. To hear sound of this DVD player through your TV, use the audio cables (white/red) to connect AUDIO OUT (L/ R) sockets of the DVD player to the corresponding AUDIO IN sockets on the RF modulator (cable supplied). TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.
Connect the COAXIAL jack of the DVD player to the corresponding Digital Audio In socket on your receiver (cable not supplied). Set the DVD player’s digital output to PCM or ALL depending on the capabilities of your receiver (see page 30 {Digital Out}).
OPEN/CLOSE – Opens or closes the disc tray. Display panel – Shows information about the current status of the DVD player. Mains (AC Power Cord) – Connect to a standard AC outlet Audio Out (Left/Right) – Connect to AUDIO inputs of an...
01-37 MDV435_436_37_eng_RC2.indd 16 (continued) DISPLAY – Displays information on TV screen during playback POWER – To switch the DVD player to standby mode or ON SEARCH – To start playback from designated point SETUP – Enters or exits the system setup menu –...
RF modulator. If you are using external equipment, (e.g. audio system or receiver), turn it on and select the appropriate input source for the DVD player output. Refer to the equipment user’s manual for detail. 2006-04-27 5:08:05 PM 2006-04-27 5:08:05 PM...
DVD VIDEO disc in the progressive scan mode. In such a case, turn off the progressive scan feature on both the DVD player and your TV. 2006-04-27 5:08:05 PM 2006-04-27 5:08:05 PM...
Step 4 : Selecting the matching color system The color system of the DVD player, disc and TV should match in order for the disc to play. Before changing the TV system, determine the color system of your TV. SYSTEM SETUP...
On-screen display (OSD) language Select this to change the language of this DVD player screen display menu. The menu language (on-screen display) for the system will remain as you set it. LANGUAGE SETUP...
Tip: DivX is an option for certain models only. TIPS: Some discs cannot be played on this DVD player due to the confi guration and characteristics of the disc, or due to the condition of recording and authoring software that was used.
Playback Features Starting disc playback Turn on the TV to the correct programme number for the DVD player (e.g. ‘EXT’, ‘0’, ‘AV’). Press STANDBY-ON to turn on the DVD player. Press OPEN/CLOSE on the front of the DVD player. Place a disc into the disc tray with the label facing up, then press OPEN CLOSE ç.
Operations for video playback (DVD/VCD/SVCD) Using the Disc Menu Depending on the disc, a menu may appear on the TV screen once you load in the disc. To select a playback feature or item keys or numeric keypad (0-9) on the remote, then press OK to start playback.
Playback Features Selecting various repeat/ shuffl e functions Repeat play mode The repeat play options vary depending on the disc type. While playing a disc, press REPEAT continuously to choose a repeat options. CHAPTER (DVD) – to repeat playback of the current chapter.
Always refer to the instructions supplied with the discs. 01-37 MDV435_436_37_eng_RC2.indd 25 01-37 MDV435_436_37_eng_RC2.indd 25 Playback Features Playing a DivX disc This DVD player supports the DivX movie playback that you download from your computer onto a CD-R/RW or DVD±R/RW. Load a DivX disc.
Playback Features Playing MP3/JPEG/Kodak Picture CD IMPORTANT! You have to turn on your TV and set to the correct Video In channel. (See page 17 ‘Finding your viewing channel’). Load a picture disc (Kodak Picture CD, JPEG) For Kodak disc, the slide show will begin.
This DVD Player setup is carried out via the TV, enabling you to customise the DVD player to suit your particular requirement. Using the System Setup menu In disc mode, press SETUP. Press to select { SYSTEM SETUP }. SYSTEM SETUP...
DVD Menu Options Password You need to enter the four-digit password to play a prohibited disc or if prompted for a password. If the disc is locked, set the Rating to (8 Adult) to have all disc play. In ‘System Setup’, press { PASSWORD }, then press OK.
Default Setting the DEFAULT function will reset all options and your personal settings to the factory defaults, except your password for rating. In ‘System Setup’ menu, press highlight { DEFAULT }, then press select { RESTORE }. Press OK to confi rm. All settings will now reset to factory defaults.
{ PCM } Select this if the connected device is not capable of decoding multichannel audio. ® The DVD player will convert the Dolby Digital and MPEG-2 multichannel signals to PCM (Pulse Code Modulation). Press to select a setting, then press OK to confi rm your selection.
In ‘Audio Setup’, press { DOWNMIX }, then press { LT/RT } Select this option if your DVD Player is connected to a Dolby decoder. { STEREO } Select this to change channel output to stereo which delivers sound from only the two front speakers.
DVD Menu Options Using the Video setup menu In disc mode, press SETUP. Press select { VIDEO SETUP }. VIDEO SETUP VIDEO OUT BRIGHTNESS CONTRAST SATURATION SHARPNESS EXIT SETUP Video Out In ‘Video Setup’, press { VIDEO OUT }, then press Press to highlight one of the options below,...
TV STANDARD (PAL/50Hz) (NTSC/60Hz) Number of lines Playback Multistandard (PAL/NTSC) VIDEO PERFORMANCE Video DAC 10 bit, 108mHz YPbPr 0.7 Vpp ~ 75 ohm Video Output 1Vpp ~ 75 ohm VIDEO FORMAT Digital MPEG 2 for DVD,SVCD Compression MPEG 1 for VCD DivX 50Hz 60Hz...
(± signs). – Switch on your TV and set to the correct Video In channel for the DVD player. You may go to Channel 1 on your TV, then press the channel down button on your TV’s remote control until you see the TV programme.
– Check that the DivX movie downloaded is a complete fi le. – The audio codec may not be supported by this DVD player. – Check that fi le size of the movie does not exceed the fi le size of the disc during downloading.
Glossary Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specifi c numerical values. These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs.
Magnavox is not liable for any damage to or loss of any pro- grams, data, or other information stored on any media con- tained within the product, or any non-Magnavox product or part not covered by this warranty.