LG LUTD4919SN Owner's Manual page 63

Problem
• Surface is not level
• Oven is tipping
• Flames too big on
converted cooktop
(NP  LP)
• Flame is too small or
too large
Cause
1. Range not leveled
2. Anti-tip device not installed correctly
Level both sides of range
Approximately
0.65"
(16.5 mm)
2
1
The installer missed part of the conversion.
(Check 2 parts: regulator, cooktop valve).
regulator
18.5 K burner needs choke.
Set Screw
Choke
Burner
base
1. Variable gas pressure
2. Installer did not check
Center adjustment screw
Anti-tip bracket Wall plate
Screw must
enter wood or
concrete
Use carpenter's level to
check level.
cooktop valve
Burner
cap
choke
LIMITED WARRANTY
Prevention
• Check with installer first
• Check with installer first
• Refer to installation manual
• Check with installer first
• Refer to installation manual
• Check with installer first
63