Water Indicator - Sony ST26i Working Instructions

Replacement

4.23 Water Indicator

Follow the 3.1 – 3.4 Disassembly instructions!
Carry out the Removal as described below.
Prepare a new Water Indicator.
Carry out the Installation as described below.
Follow the 5.4 – 5.5, 5.7 – 5.8 Reassembly instructions!
REMOVAL
There are two Water Indicator on the phone as shown in the
picture.
Note: Replacement method is the same for the two
Water Indicator!
Detach the Water Indicator.
Scrap! Not to be reused!
INSTALLATION
Place a new Water Indicator in the correct position.
1268-3894 Rev 2
©
Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
40(57)