Connector Film (Front Side Of Main Pba) - Sony ST26i Working Instructions

Replacement

4.11 Connector Film (Front side of Main PBA)

Follow the 3.1 – 3.4 Disassembly instructions!
Follow the 4.13 Removal instructions!
Carry out the Removal as described below.
Prepare a new Connector Film.
Carry out the Installation as described below.
Follow the 4.13 Installation instructions!
Follow the 5.4 – 5.5, 5.7 – 5.8 Reassembly instructions!
REMOVAL
Release the foil from down side of the key dome and lift it up
by using a Flex Film Assembly Tool.
Check the adhesive on the back side of SIM SD Side Key
FPC.
If the side key adhesive is not damaged after
disassembly, the SIM SD Side Key FPC can be reused
one time only! Otherwise always scrap the SIM SD Side
Key FPC after side key disassembly whatever the side
key adhesive is damaged or it's disassembled more
than two times!
Peel off the Connector Film.
Scrap! Not to be reused!
1268-3894 Rev 2
©
Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
21(57)