Sony ST26i Working Instructions page 43

5 Reassembly
The reassembly is done in the following order:
1. Main PBA (a) & Link FPC (b)
2. Front Cover Display Assembly
3. Sub Board Assembly
4. Rear Cover
5. Antenna BT WIFI (a) & Antenna GPS (b) & Antenna
Main (c)
6. Core Unit Label
7. Battery
8. Battery Cover
5.1 Main PBA & Link FPC
Prepare the Main PBA and new Link FPC.
Use new Link FPC due to it can't be reused after
disassembly.
Connect the ZIF connector by using a Flex Film Assembly
Tool.
Lock the ZIF connector by using a Front Opening Tool.
1268-3894 Rev 2
©
Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
43(57)