HP RPN SCIENTIFIC WP 34S Owner's Manual page 37

The indicators following below are all lit in the dot matrix exclusively:
Indicator Set by

©
i
complex result
D DBLON

ⓕ

ⓖ

Ⓖ

ⓖ →

ⓗ
M.DY
M.DY, SETUS
Y.MD, SETJPN,
Y.MD
SETCHN
↕ entering a catalog
Defaults D.MY and DECM are not indicated. Radix marks and separators are seen in the
numeric output immediately, time modes (12h / 24h) in the time string. The numeric format
of fraction mode (FRC) is unambiguous as well. Check the examples shown on p. 40ff.
Some mode and display settings may be saved and recovered collectively by STOM and
RCLM. These are stack depth, display contrast, complete decimal display settings, trig
mode, choices for date and time display, parameters of integer and fraction mode, curve fit
model, rounding mode, and precision selected. STOM stores this information in the
register you specify. RCLM recalls such a register content and sets the WP 34S modes
accordingly.
ATTENTION: Ensure that you actually recall mode data – else your WP 34S may be
driven into very strange settings and it may cost you considerable effort to recover
from that unless you find your previous modes stored elsewhere! See
All keyboard input will be interpreted when the input is completed, according to the modes
set at input time.
WP 34S Owner's Manual
Cleared by
see p. 35
else
DBLOFF
see p. 35
 
,
see p. 35
any other date or region
setting
leaving it
Edition 3.1
Explanation, remarks
Transient signal of prefix pend-
RAD
ing. will be lit together with
See p. 29.
See Appendix H.
Transient signal of prefix pending
Angular mode (see p. 42)
Transient signal of prefix pending
Date modes (see p. 39)
See p. 125ff for more about cata-
logs.
Appendix
©
.
H.
Page 37 of 211