Data Transfer Between Your Wp 34S And Your Computer - HP RPN SCIENTIFIC WP 34S Owner's Manual

Data Transfer between Your WP 34S and Your Computer

The emulator and the calculator can talk to each other over the cable used for flashing.
Either one of the cables mentioned on p.
described here:
http://www.hpmuseum.org/cgi-sys/cgiwrap/hpmuseum/archv020.cgi?read=186826
Remember the programming cable draws current from the batteries of your WP 34S, so
disconnect it from your WP 34S as soon as it is no longer needed.
In the emulator directory, a plain ASCII text file wp34s.ini must be placed that contains
just a single line (terminated by CR/LF) stating the name of the computer port used for
serial communication, such as e.g.
COM2:
The following commands (all stored in P.FCN catalog) allow for sending programs,
registers or all RAM from your WP 34S to your computer or vice versa. With a suitable
cable it would be even possible to transfer data directly between two WP 34S.
WP 34S Owner's Manual
147 will do, or you need a modified calculator as
Edition 3.1
.
Page 166 of 211