Withings BPM Core Product Manual page 4

4
Warnings and safety notices
EN
- Use of the device can temporarily cause the loss of function of
FR
equipment that is used simultaneously on the same limb.
DE
- Do not use if you have a congenital cardiomyopathy, aorto-ve-
SV nous fistula, pulmonary pathology, a prosthetic heart valve, if you
NL are on kidney dialysis, or if you are hemodynamically unstable.
- There is a risk concerning Lead, PZT, DEHP, DBP, SCCP and D6
FI
according to REACH regulation 1907/2006.
DA
IT
Types of measurements
ES
CS
Withings BPM Core allows you to take two types of measure-
PL
ments:
PT
- Blood pressure and heart rate, which uses the cuff as a sensor.
RO
- ECG and Heart Sounds recording, which uses three electrodes
HU
(two inside the cuff, the other on the metal tube) and the stetho-
SK
scope (the circular white sensor on the cuff).
ET
EL
Before the measurement
IS
LV Before the measurement, make sure that you:
- Choose a calm, quiet room to take the measurement.
LT
- Ensure you have a chair, one with a back, and a table or armrest
SL
on which you can place your arm.
TR
- Use the device on the left upper arm.
BG
- Do not speak or move during the measurement.
HR
- Wear only one layer of clothing, which should not cover your left
arm. The electrodes should be in contact with the skin.
How to take measurements
1 - Sit down in a comfortable
position, legs uncrossed,
feet flat on the floor, arm
and back supported.
Uncover your left arm. Rest
for 5 minutes before the first
measurement.
2 - Tighten the cuff around
your arm. The stethoscope
should be facing the rib
cage, with the metal tube
facing down about one inch
above the elbow.
1.
2.