Brewing Coffee - Philips Senseo HD7810 User Manual

A
B
C
8 Put a bowl (with a capacity of at least 1500 ml) under the
coffee outflow openings to collect the water.
C
9 Press on/off button I and subsequently press buttons ° and
°° briefly at the same time.
◗ The machine will fill itself with water from the water reservoir.
This will take some time and you will probably not notice that this
is happening.After a while, the machine will start flushing and it
will switch itself off after the flushing cycle. During the flushing
cycle the machine produces more noise than during a regular
brewing cycle.
Before using the machine for the first time, clean the coffee outflow unit
B
and the pod holders with hot water and some washing-up liquid or in a
dishwasher. Clean the water reservoir thoroughly in hot water, if
necessary with some washing-up liquid.
Now your Philips SENSEO\ coffee machine is ready for use.

Brewing coffee

C
1 Fill the water reservoir with cold water up to the MAX
indication and put it back into the machine.
Never pour milk, coffee, hot water or carbonated water into the water
reservoir.
- ° MIN: minimum amount of water required to brew 1 cup of
SENSEO\ coffee.
- °° MIN: minimum amount of water required to brew 2 cups of
SENSEO\ coffee.
- A full reservoir allows you to make SENSEO\ coffee a number of
times (up to 5 cups (HD7812, HD7810), 10 cups (HD7811).This
makes it unnecessary to fill the water reservoir each time you want
to make a cup of coffee.
C
Press on/off button I.
2
The pilot light blinks while the water is heating up. Heating up takes
approx. 90 seconds.
◗ The coffee machine is ready for use when the pilot light burns
continuously.
ENGLISH
7