Philips Senseo HD7810 User Manual page 9

C
7 Close the lid and lock the lever.
Always check if the lid is properly locked.The lever must be pushed
down until it snaps home with a click.
Never start brewing with the lid open.The lid must be properly closed.
C
8 Place one cup or two cups under the outflow openings.
The cups you use should have a capacity of at least 150 ml. Do not use
cups that are too large, as they will cause the coffee to get cold more
quickly.
C
9 Press the button indicating the number of cups of SENSEO\
coffee you want to brew.
- ° for one cup
- °° for two cups
◗ The SENSEO\ coffee machine starts brewing.
- The machine automatically supplies the optimal amount of water.
- You can interrupt the brewing process at any time by pressing the
on/off button I. If you switch the machine back on after having
interrupted the brewing process, the machine will not complete the
interrupted brewing cycle.
Do not remove the water reservoir during a brewing cycle, as this will
cause the machine to draw in air.When this happens, the next cup will
only be partly filled.
If the cups are only half full when the machine stops brewing, there was
not enough water left in the water reservoir to brew two cups.To
obtain two full cups, fill the water reservoir and press button ° for
one cup.The two cups will then be filled completely.
10 Remove the coffee pod(s) after use by lifting the pod holder
out of the machine and emptying it.
Be careful when doing this, for there may still be some water/coffee on
the coffee pod(s).
Tips
◗ By rinsing the pod holders and the coffee outflow unit regularly,
you will make sure that the coffee always tastes optimally.
◗ The SENSEO\ coffee will taste best if you stir it before drinking
it.
ENGLISH
9