Canon EOS 40D Service Manual page 90

２） Main PCB Ass'y Reassembly
⑴ R oute the lead wire as shown in the image below.
⑵ T o make the handling of the lead wire smoother, connect the lead wire (11pin) into
the main body before installing the main PCB ass'y, and rotate the main PCB ass'y 360
degrees to get the lead wire twisted.
Rotate the main PCB
ass'y 360 degrees.
Fig. 057 Routing the Lead Wire on the Main PCB Ass'y (2)
All manuals and user guides at all-guides.com
Alignment positions of
main PCB shield cover.
Fig. 055 Position for the Main PCB Shield Cover
(on Main PCB Ass'y)
Run lead wire between main PCB ass'y
and main base plate.
Fig. 056 Routing Lead Wire on Main PCB Ass'y (1)
25
Repair Information