<Disassembly>
1) External Rubber Removal
⑴Remove the eyecup.
⑵Remove the back holding cover, grip holding cover, and front cover separately.
Fig. 012 Position of Back Holding Cover
2) Battery Cover Ass'y Removal
⑴Remove the extension terminal cap, and remove the O ring.
⑵ P ull the battery cover ass'y off in the direction shown by the arrow in the figure to
remove it.
Fig. 014 Position of Extension Terminal Cap
3) Interface Cover Removal
⑴Remove three screws, and remove the interface cover.
⑵Being careful not to damage the rubber, remove the interface cap. (as necessary)
All manuals and user guides at all-guides.com
Fig. 016 Position of Interface Cover Screws
8
Repair Information
Fig. 013 Position of Grip Holding Cover and
Front Cover
Fig. 015 Battery Cover Ass'y Removal