Serial No. Location; Repair Tools And Materials - Canon EOS 40D Service Manual

1.4 Serial No. Location
This number is used in various information such as service information. In particular, when
a part is replaced with a service part, the serial number is not reflected. Therefore, be sure
to copy the forth and fifth digit of the serial number on the surface of main PCB Ass'y shield
plate inside the camera.
1.5 Repair Tools and Materials
The following tools and materials are required for camera disassembly and reassembly.
１） Tools
New Name
Lead-free solder
Wrist Strap (Earth)
Conductive Sheet
Liquid Dispenser
Tweezers (AA type/GG type)
Blower
Lens Tissue (K-1 thick/K-3 thin)
Screw Driver Handle
Hi-Torque Screwdriver
CROSS-RECESS BIT TB35-5 (Φ3mm, l=50mm)
CROSS-RECESS BIT TB35-6 (Φ2.5mm,
l=115mm）
CROSS-RECESS BIT TB35-7 (Φ2.5mm, l=50mm） CY9-7014-004
CROSS-RECESS BIT TB35-8 (Φ2mm, l=50mm）
ELECTRIC SCREW DRIVER
POWER SUPPLY (100,120,220,240)
LOOUPE, DUST CHECKING
２） Charts and Locally-Made Tool
New Name
Tool battery
Load Resistor
＊For details, see "Tool Battery Fabrication".
All manuals and user guides at all-guides.com
Fig. 008
4
Repair Information
01
Part No.
CY9-4045-000
CY9-6158-000
CY9-1061-000
CY9-4017-000
CY9-4018-001/002
CY9-4020-000
CY9-4023-001/003
CY9-7014-001
CY9-7015-000
CY9-7014-002
CY9-7014-003
CY9-7014-005
CY9-7061-000
CY9-7062-000（xxx）
CY9-1132-000
Part No. Purpose/Subject
Locally-made Inhibit voltage
Locally-made Inhibit voltage