Revenue Locking; Revenue Lock Switch - Siemens 9410 Series User Manual

Revenue metering

Revenue locking

Revenue lock switch

7EN05-0336-03
• Clear all meter data prior to installing your revenue meter.
• Unlock your revenue meter.
• Configure the required revenue settings specific for installation. Once the meter is
locked, these settings cannot be changed.
NOTE: If you are using ION Setup to configure your meter, allow for any
communication delays before removing power to your meter.
• Verify the revenue settings have been implemented.
• Revenue lock your meter.
• Verify the meter is revenue-locked.
• Install the meter according to your meter's install sheet.
• Install the voltage and current terminal covers according to the sealing kit
installation instructions.
Revenue locking your meter helps prevent modifications to revenue-related settings
and data on your meter, or tampering with your meter's voltage and current
connections.
Revenue locking may be required to help meet government regulations and utility
security requirements, or can be used to help ensure the validity of revenue data.
Download the ION Device Template Reference, available from
www.usa.siemens.com/pds to view a complete listing of revenue-locked parameters
and data.
See the meter's catalog pages, available from www.usa.siemens.com/pds, or consult
your local Siemens Industry representative for information about your device, its
options and accessories.
Related Topics
• Revenue lock LED behavior
You can revenue lock your meter using the revenue lock switch located on the meter
base.
This switch is accessed through a sealable cover.
9410 series
A. Revenue lock switch cover
B. Sealing point
C. Revenue LED
191