Connecting The Liquid Propane Cylinder - Weber 56524 Owner's Manual

CONNECTING THE LIQUID PROPANE CYLINDER

m WARNING: Make sure that the LP cylinder or regulator valve
is closed.
A) Connect LP cylinder .
Some regulators push ON to connect, and pull OFF to disconnect, others have a
nut that has a left-hand thread that connects to the cylinder valve . Follow one of the
specific regulator connection instructions illustrated based on your regulator type .
a) Screw regulator fitting onto tank turning clockwise (1) . Position the regulator so
that the vent hole (2) faces down .
b) Screw regulator fitting onto tank turning anti-clockwise (3) (4) .
c) Turn regulator lever (5) clockwise to the off position . Push regulator down on
tank valve until regulator snaps into position (6) .
d) Make sure regulator lever is in the off position . Slide the collar of the regulator
up (7) (9) . Push the regulator down onto the tank valve and maintain pressure .
Slide collar closed (8) (10) . If regulator does not lock, repeat procedure .
GAS INSTRUCTIONS
◆
3
6
1
2
3
4
5
7
9
4
8
10
www.weber.com
® 9