Care & Safeguards - A.O. Smith AOS-HERO-CHR Owner's Manual

Care
To clean the system manifold and tank, wipe exterior with a damp cloth. Do not use
any strong or abrasive cleaning agent or solvent cleaner.
NOTICE
Safeguards
• If you experience a tubing connection leak, shut off cold water, disconnect and
re-set the tube.
• Do not install this system where the line pressure may exceed 100 psi. The operating
pressure range for this system is between 40-100 psi.
• Install on COLD water lines only (40°F-90°F).
• It is recommended that your system be installed inside and out of direct sunlight.
The system must be protected from both direct sunlight and freezing temperatures.
• System and installation shall comply with applicable state and local laws.
• Do not operate without the filters installed.
• Do not use with water this is microbiologically unsafe or of unknown water quality
without adequate disinfection before or after the system.
• Systems certified for cyst reduction may be used on disinfected waters that may
contain filterable cysts.
• This reverse osmosis system contains a replaceable treatment component that
is critical for the effective reduction of total dissolved solids. It is recommended to
periodically test this reverse osmosis system to verify it is performing properly.
• This reverse osmosis system contains a replaceable component critical to the
efficiency of the system. Replacement of the reverse osmosis component should
be with one of identical specifications, as defined by the manufacturer, to ensure
the same efficiency and contaminant reduction performance.
NEED HELP? GIVE US A CALL 877.333.7108
CARE & SAFEGUARDS
8