Graco Magnum ProX7 Operation page 16

Step 12 is for returning paint in hose back to paint
pail. One 50-ft hose holds approximately 1-quart
(1-liter) of paint.
12. To preserve paint in hose:
a. Point gun into paint pail.
b. Unlock gun trigger lock.
c. Pull and hold gun trigger.
d. Turn Prime/Spray valve to
SPRAY.
e. Turn power switch ON.
f. Continue to hold gun trigger until you see paint
diluted with flushing fluid starting to come out of
gun.
16
13. While continuing to
14. Stop triggering gun. Engage
ti8909a
15. Turn power switch OFF.
ti9345a
16. Clean InstaClean Fluid Filter and gun, page 19.
17. Fill unit with Pump Armor
o preserve paint in hose, trigger gun into paint pail
to expel the remaining paint.
trigger gun, quickly move
gun to redirect spray into
waste pail. Continue
triggering gun into waste
pail until flushing fluid
dispensed from gun is
relatively clear.
trigger lock.
Term Storage, page 20.
Shutdown and Cleaning
ti9745a
ti8908a
™
storage fluid. Read Long
312001B