Bump Testing - Emerson Rosemount 928 Reference Manual

Operation and maintenance
February 2023
7. When you have finished viewing sensor log records, select Exit.
8. Select Finish.
5.8

Bump testing

Bump testing is a process by which the target gas is introduced to the sensor to verify
that the device is functioning properly. Bump testing does not replace calibration. Emerson
recommends bump testing throughout the sensor's service life as prescribed by your
facility preventative maintenance procedures.
If bump testing fails, recalibrate the sensor. Refer to
fails to accept a new calibration, replace it. Refer to
152
• Select
Read Next Record
the selected database search method. This is the default option.
• Select
Show Additional Status
record. This option is available only if additional information is available for the
selected record.
• Select to leave the sensor log.
Exit
to go to the next record in the sensor log based on
to view more information from the selected
Calibrating the
Replace the gas
Reference Manual
00809-0100-4928
sensor. If the sensor
sensor.
Emerson.com/Rosemount