Advertisement
No.
Display
Key Name
a
Pattern display size
b
Automatic
reinforcement stitch
key
c
Automatic thread
cutting key
d
Pivot key
e
Guideline marker key Press this key to display the guideline marker along the sewing line. The
f
Stitch width and
stitch length key
g
"L/R Shift" key
h
Thread tension key
i
Memory key
j
Sensor function key
k
Elongation key
l
Delete key
m
Needle mode
selection key
(Single/Double)
n
Size selection key
o
Vertical mirror image
key
p
Horizontal mirror
image key
q
Single/Repeat sewing
key
r
Back to beginning key When sewing is stopped, press this key to return to the beginning of the
s
Free motion mode
key
t
Thread density key
u
Character spacing
key
Show the approximate size of the pattern selected.
: Nearly the same size as the sewn pattern
: 1/2 the size of the sewn pattern
: 1/4 the size of the sewn pattern
*
The actual size of the sewn pattern may differ depending on the type of
fabric and thread that is used.
Press this key to turn on the automatic reinforcement stitching mode.
Press this key to turn on the automatic thread cutting mode.
Press this key to select the pivot function. When the pivot function is selected,
stopping the machine lowers the needle and slightly raises the presser foot
automatically. In addition, when sewing is restarted, the presser foot is
automatically lowered.
• If this key appears as
, the pivot function cannot be used.
• Be sure the needle position on page 4 of Machine Settings is set to the
down position.
guideline marker makes it easier to align stitches with the fabric edge or other
marker on the fabric.
Shows the stitch width and stitch length of the selected stitch pattern. The
machine default settings are highlighted.
Press
to shift the stitch pattern to the right or press
pattern to the left. This feature is not available on all patterns. Only those
applicable will be shifted. The machine default setting is highlighted.
Shows the thread tension setting for the selected stitch pattern. The machine
default settings are highlighted
Use this key to save stitch pattern combinations.
Press this key to use the sensor function.
When 7mm satin stitch patterns are selected, press this key to choose from 5
automatic length settings, without changing the stitch zigzag width or stitch
length settings.
When you make a mistake selecting a stitch pattern, use this key to delete the
mistake. When you make a mistake in combining stitch patterns, use this key
to delete stitch patterns.
Press this key to choose single needle sewing or twin needle sewing.
Use this key to select the size of the stitch pattern (large, small).
After selecting the stitch pattern, use this key to create a vertical mirror image
of the stitch pattern.
After selecting the stitch pattern, use this key to create a horizontal mirror
image of the stitch pattern.
Press this key to choose single stitches or continuous stitches.
pattern.
Press this key to enter free motion sewing mode.
The feed dog is lowered and presser foot is raised to a height appropriate for
free motion quilting.
After selecting the stitch pattern, use this key to change the thread density of
the pattern.
Press this key to change the spacing of character patterns.
EDITING STITCH PATTERNS
Explanation
to shift the
Page
111
83
91
93
92
4
88-90
89
90
188
98
178
170, 171
63
178
178
178
178
179
131
179
171
177
Advertisement
Chapters
