Sharp LC-32WD1RU Service Manual page 40

LC-32WD1E/S/RU and LC-32WT1E
VIDEO PATH CHECK
are VDI_D(x) signals arriving to PNX5010E (D040) ?
are VDO_D(x) signals and CLK signal arriving to LVDS transmitter
are LVDS signals arriving to common mode chokes (Z060 - Z061 -
Z062 - Z063 - Z064) ?
are LVDS signals arriving to LVDS connector (X060) ?
is LVDS_POWER available at the LVDS connector (X060) ?
are LVDS power and LVDS signals available on
the LCD control unit ?
Is backlight ON ?
replace LCD control unit
yes
D061 ?
yes
yes
yes
yes
yes
yes
check CPLD (D080) power levels, peripherals, CPLD code
no
PNX5010E (D040) is not functioning normal, check PNX SW,
no DDR-SDRAM, XTAL, power supply and other peripheral
check pin32 of D061 (power_down?) => check D063 signals and
peripherals, check other LVDS transmitter peripherals
no
check common mode chokes (Z060 - Z064)
no
Is +12V available ? NO => check PSU
YES => check DC/DC converter, check panel_power_enable signal
no
no
GO TO backlight Faillure
no
6 - 20
and peripherals
check LVDS wiring