Table of Contents
Advertisement
LC-32WD1E/S/RU and LC-32WT1E
[1.5] Digital Upgrade Process
1.
Place the latest digital software on the CF card. (Refer to the release notes to identify the correct file.)
2.
If the TV is not already on, connect the TV to AC power and press
3.
Press DTV on the remote control to put the television into DTV mode.
4.
Disconnect the TV from AC power. Wait 10 seconds.
Do NOT go to standby first. Just unplug the power cord.
5.
Insert the CF card into the PCMCIA CF adapter.
6.
Insert the PCMCIA CF adapter into the CI-slot on the rear panel of the TV. (Refer to "Television rear and side view" on
page 2-1.)
7.
Connect the TV to AC power.
The upgrade process will start. The message "Digital TV, Starting" will display on the screen.
8.
When the "Digital TV, Starting" message is no longer on the TV, the upgrade process is complete.
9.
Press
to turn on the TV.
10. Using the remote control, verify that the TV was upgraded correctly by going to the following screen:
Press DTV and then press DTV MENU. Go to Installation > About.
[2] ENTERING THE PUBLIC MODE MENUS
1.
On the remote control, press MENU.
•
The TV Menu screen displays.
2.
Enter the PIN code "3001".
•
Using the number keypad, press 3, then 0, then 0, and then 1. (Each button in the sequence must be pressed
immediately after the button before it or the television will not recognize the entry code.)
Note:
Depending on the Public Mode settings, the TV Menu screen may not be visible when Public Mode is
activated. To open the Public Mode menu, the user still needs to open the TV Menu (which remains hidden)
and enter "3001".
[3] REMOTE CONTROL KEY OPERATION IN PUBLIC MODE
[3.1] Remote Control Key Operation
Remote
Control Key
Function / Remark
/
Press to move up and down and select the desired item.
Press to change the setting of the selected item.
/
END
Press to exit the service menus.
[4] PUBLIC MODE SETTINGS
Item
Available Settings and Description
Power On Fixed
Variable — The TV will go into standby mode when
Fixed — The TV will not go into standby mode when
Maximum Volume
[Range] — The volume level specified here is the maximum volume level for the TV.
Volume Fixed
Variable — The sound volume is not fixed.
Fixed — The sound volume is fixed to the level set in "Volume Fixed Level".
Volume Fixed Level
[Range] — The volume level specified here is the fixed volume level for the TV.
to turn the TV on.
is pressed.
is pressed.
5 - 5
Advertisement
Table of Contents
