Pentax Optio Optio SV Connection Manual page 24

2
Confirm that [PENTAX USB
DISK Device] is selected and
click [Stop].
The [Stop a Hardware device] screen
appears.
3
Confirm that [PENTAX USB
DISK Device] is selected and
click [OK].
A message appears.
4
Click [OK].
5
Disconnect the camera from your PC.
Windows 98/98SE
Make sure the status lamp (green) of the camera is not
blinking and disconnect the USB cable from your PC.
• If the camera (removable disk) is being used by an application
such as ACDSee for PENTAX, the camera cannot be
disconnected until the application is closed.
• The camera will turn off automatically when the USB cable is
disconnected.
22