Saving Your Settings (Memory) - Pentax Optio E40 Operating Manual

Saving Your Settings (Memory)

The Memory function is for saving the current camera settings even
when the camera is turned off.
For some camera settings, the Memory function is always set to O (On)
(the settings are saved when the camera is turned off), while for others
you can choose on or off (to choose whether the settings are saved or
not when the camera is turned off). The items which can be set to O (On)
or P (Off) in the Memory function are shown in the table below. (Items
not listed here will be saved in the selected settings when the camera is
turned off.) If you select O (On), the settings will be saved in the status
they were in immediately before the camera was turned off. If you select
P (Off), the settings will be reset to the defaults when the camera is
turned off. The table below also shows whether the Memory default
setting for each item is on or off.
Item
Flash Mode The flash mode set with the four-way controller (4) (p.71)
The drive mode set with the four-way controller (2) (p.80,
Drive Mode
p.81)
Focus Mode The focus mode set with the four-way controller (5) (p.67)
Zoom Position The zoom position set with the Zoom/w/x button (p.65)
The manual focus position set with the four-way controller
MF Position
(23) (p.68)
The [White Balance] setting on the [A Rec. Mode] menu
White Balance
(p.74)
Sensitivity The [Sensitivity] setting on the [A Rec. Mode] menu (p.73)
EV The [EV Compensation] setting on the [A Rec. Mode]
Compensation menu (p.76)
The [Digital Zoom] setting on the [A Rec. Mode] menu
Digital Zoom
(p.66)
The LCD monitor information display mode set with the
DISPLAY
4/W button (p.78, p.92)
If a new SD Memory Card is inserted when On has been
File No.
selected, file numbers are assigned sequentially.
Description
4
Default
Setting
O
P
P
P
P
P
P
P
O
P
O
85