Setting The Sensitivity - Pentax Optio E40 Operating Manual

Setting the Sensitivity

You can select the sensitivity to suit the brightness of the surroundings.
Sensitivity
Sensitivity is automatically adjusted between ISO 80 – 400. (In Digital SR mode,
Auto
it is automatically adjusted within the range of ISO 80 – 1000.)
80
• The lower the sensitivity, the less noise that affects the image. The
160
shutter speed will be slower in low light conditions.
320
• Higher sensitivity settings use faster shutter speeds in low light
400
conditions to reduce camera shake, but the image may be affected by
800
noise.
1000
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Sensitivity].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to change the sensitivity.
5
Press the 4 button.
The Sensitivity setting is saved.
6
Press the 3 button.
The camera returns to capture status with the current setting.
In c mode, the sensitivity is fixed to Auto (ISO 80– 1000).
Saving the Sensitivity 1p.85
2, 3, 4
5
1, 6
Available in b R A q < I i \ Q E
Rec. Mode
8
M
MENU
AWB
ISO
AUTO
MENU Exit Exit Exit
8
M
AWB
ISO
AUTO
MENU
1/3
Recorded Pixels
Quality Level
White Balance
AF Mode
Sensitivity
Rec. Mode 1/3
Auto
Recorded Pixels
64
Quality Level
100
White Balance
200
400
AF Mode
800
Sensitivity
1600
Cancel OK
Y
4
OK
73