Digital Setup - Sharp AQUOS LC-32LE280X Manual

Part Names (Continued)
TV (Rear)
LC-32LE280X
USB
first
DC5V 1.5A
2
AROLD
3
MHL
DC5V 0.9A
4
5
INPUT 3
6
SERVICE ONLY
7
LC-40LE280X
9
8
* Use USB port for USB music player. (See page 27.)
* * Do not use to connect this input because it is only for KTV.
•
The illustrations and images displayed on the screen in this operating manual are for explanation purposes only and may differ
slightly from actual operation.
•
Some features may differ depending on the selected country.
USB connector*
first
2
INPUT connector 1 (INPUT 1) (HDMI/ARC)
3
INPUT connector 2 (INPUT 2) (HDMI/MHL)
4
ANT connector (Antenna input)
5
Connector INPUT 3 (IN 3)
6
SERVICE Connector ONLY**
7
/AUDIO Output Connector (L/R)
8
ButtonPOWER(POWER) (On/Off)
9
Keyboard control
FUNCTION
SMALL FILTER KEY
BASIC
r
SMALL CHANNEL INCREASE
S
REDUCTION SMALL CHANNEL
+
INCREASE VOICE
8
–
VOICE REDUCTION
9 INPUT
b (BELOW 1 SEC)
b (FROM 1 SECOND
MENU
ABOVE)
* Repeat keys
/AUDIO Output connector (L/
first
2 R) SERVICE ONLY connector**
3
INPUT 3 connector (IN 3) ANT
4
connector (Antenna input)
5
INPUT connector 2 (INPUT 2) (HDMI/MHL)
first
6
INPUT connector 1 (INPUT 1) (HDMI/ARC) USB
2
SERVICE ONLY
7
connector*
INPUT 3
8
KnotPOWER(POWER) (On/Off)
9
Keyboard control
3
FUNCTION
SMALL FILTER KEY
BASIC
4
r
SMALL CHANNEL INCREASE
5
MHL S
REDUCTION SMALL CHANNEL
DC5V 0.9A
+
INCREASE VOICE
6
ARC
–
VOICE REDUCTION
USB
7
b (BELOW 1 SEC) INPUT
DC5V 1.5A
b (FROM 1 SECOND
MENU
ABOVE)
* Repeat keys
Toggletelevision
Power on/off
• To turn on the power
PressPOWER(SOURCE) on the TV or remote control. (After a
few seconds, the image appears along with the sound.)
• To turn off the power
Turn off the TV by pressingPOWER(SOURCE) on the TV or
remote control.
ATTENTION
•
If you do not use this TV for a long time, be sure to remove
the AC cord from the AC outlet.
•
The device consumes less power when in standby mode.
FUNCTION
Automatic installation
WHILE OPENING
MENU
When turning on the TV for the first time after purchase,
*
r
the initial automatic setting appears. Follow the drivers
*
S
and make the necessary settings in turn.
*
+
PressPOWER(POWER) on the remote control.
first
*
– •
The initial automatic setting appears.
PressENTER(ENTER)to start the installation.
SELECT/IN
2
Pressa/bto select the desired language, then
BACK/EXIT OUT
pressENTER(ENTER).
MENU
Pressa/bto select the country channel in
"Local", then pressENTER(ENTER). PressCDto
select "Home" or "Display", then pressENTER
(ENTER).
Home:
• "Standard" will be the default setting value for "AV
Mode".
Display:
• "Vivid (Fixed)" will be the default setting value for "AV
Mode". If "AV mode" changes, the TV will
automatically return to "Dynamic (Fixed)" when
there are no other changes to the TV settings for 30
minutes.
•
To switch from Gallery mode to Home mode, refer
FUNCTION to page 16 to reset the device.
3
WHILE OPENING
Pressa/bto select "DTV", "ATV" or "DTV + ATV" in
MENU
"Type Search", then pressENTER(ENTER).
*
r •
Automatic installation will be performed.
•
You don't need to do anything during auto
*
S
tuning.
*
+ •
If you select "Other" country some DTV channels
may not be tuned correctly.
*
–
PressCDto select "Start" or "Cancel", and then
pressENTER(IN) to search for available
SELECT/IN
channels.
BACK/EXIT OUT
MENU
11
twelfth
ATTENTION
• In some country settings, this unit may not display
"DTV", "ATV" or "DTV + ATV" selection function.
•
The device may display the service or region selection
screen depending on the country setting or cable
provider selection. Follow the on-screen prompts to make
your selection.

Digital Setup

You can reconfigure the DTV service settings
automatically or manually.
PressMENU(DRIVERS) and the DRIVERS
first
screen is displayed.
2
PressCDto select "Initial installation".
3
Pressa/bto select "Digital Setup", then press
ENTER(ENTER). If you have set a password,
enter it here.
• See "Child Lock" to set the password.
4
Pressa/bto select the desired driver item, and
then pressENTER(ENTER).
HAuto detect
Use this menu to add new services
automatically after "Automatic Setup" has been
completed.
• Pressa/bto select "DTV" or "DTV+ATV".
HManual search
Add new services to a specific band channel.
•
PressCDto tune in then pressENTER(ENTER).
HSignal information
Use this driver to check the signal information according to
the available channel.