PLAYBACK MODE - THE BASICS
Viewing Images
You can display the still images one by one.
1. Rotate the mode dial to
your camera on by pressing the Power switch.
2. Press the
button.
The last recorded image appears on the LCD monitor.
3. Use the four-way controller (
To view the previous image, press the four-way controller ( ).
To view the next image, press the four-way controller ( ).
The playback information displayed on the LCD monitor will disappear after 2 seconds.
For protected images/movie clips,
For images selected for printing with DPOF setting,
If there is no image stored in the internal memory or on the memory card. [No Image] message will appear on the monitor.
You cannot enter the Playback mode from the Setup mode.
,
,
,
,
,
or
) to select the desired images.
mark will be displayed. (Refer to EN-52 for further details.)
mark will be displayed. (Refer to EN-53, 54 for further details.)
and turn
100-0001
Size
EV
01.11.'05
2560X1920
0.0
15:00
1
EN-43