Pentax K200D Operating Manual page 147

2
Press the 4 button.
The Custom Image screen appears.
After the power is turned on, the last
image taken is displayed in the
background. Set the main switch to | to
change the background image to the
Digital Preview image.
3
Use the four-way controller
(45) to choose the Image Tone.
4
Use the four-way controller (23) to choose the item you
want to change ([Saturation], [Hue], [Contrast],
[Sharpness]).
When Image Tone is set to [Monochrome], you can change the settings
for [Filter Effect], [Toning], [Contrast], and [Sharpness].
5
Use the four-way controller (45) to change the setting.
The background image changes according to the setting.
You can visually check the saturation and hue with the radar chart.
For [Sharpness], turn the e-dial to switch between [Fine Sharpness] and
[Sharpness]. The image outlines are even thinner and sharper with [Fine
Sharpness], making it suited for capturing fine subjects such as hair.
Press the Green button to reset the setting.
6
Press the 4 button.
The camera returns to the Capture mode.
• In Picture mode or H (Scene) mode, you can confirm the custom image,
however, the settings cannot be changed.
• When Image Tone is set to [Monochrome], the radar chart is not displayed.
Bright Bright Bright
M M
B B
Portrait Portrait Portrait
M M
B B
145
R R
Y Y
G G
C C
Check Check Check
OK OK OK
OK
BW
R R
Y Y
G G
C C
Check Check Check
OK OK OK
OK
6