Regency ONCSBKBK6020 Instructions

Double Shelf Low Credenza • ONCSBKBK6020 • INSTRUCTIONS
Storage Cabinet/ Single Shelf Low Credenza • ONCSSCBK6020 • INSTRUCTIONS
Double Storage Cabinet Low Credenza • ONCSSCSC6020 • INSTRUCTIONS
Organize your parts and hardware. You will need (2) people and a Phillips head screwdriver.
Hardware :
A: Glides(8) • B: Screws(12) • C: Bolts(8) • D: Cam Pins(14) • E: Shelf Pins(4) • F: Cam Cover(14) • G: Allen Key
H: Credenza Top Screws(8) • S: Long Bolts (4) • T: Washers(12)
A B C
Parts :
I: Back(2) • J: Base Panel(2) • K: Top Panel(2) • L: Right Side(2) • M: Left Side(2) • N: Shelf(2) • O: Metal Legs(4)
P: Leg Connector Bracket(2) • Q: Credenza Top
I
O
STEP 1 : Insert 2 Cam Pins (D) into Back Panel (I). Place
Back Panel (I) on a flat surface with pins facing up. Attach base
(J) and Top (K) by inserting and locking cams (see fig 1.) The
cam locks on the Base and Top should both be facing down. cam locks on the Base and Top should both be facing down.
D
I
D
IMPORTANT NOTICE:
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have all parts and hardware.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Do not tighten all screws/bolts until completely assembled.
Keep all hardware parts out of reach of children.
Any problems or questions call Regency Office Furniture at 1-866-816-9822
CARTONS: OTT6020, (2)OPSC3020
CARTONS: OTT6020, (2)OPSC3020, OSCD3020
CARTONS: OTT6020, (2)OPSC3020, (2)OSCD3020
D E F G
J J
P
K
I
H T
S
K K
Q Q
STEP 2 : Insert 6 Cam Pins (D) into each Side (L,M)
D
L
J
D
Figure 1: To open Cam,
point arrow toward Cam
Pin hole. To lock Cam,
turn clockwise.
L
M
D
D
D
D
D D
D
D
N N
D
M
D