Specifications - Pioneer X-CM30 Operating Instructions Manual

Specifications

As part of our policy of continuous improvement, PIONEER
reserves the right to make design and specification changes
for product improvement without prior notice. The
performance specification figures indicated are nominal
values of production units. There may be some deviations
from these values in individual units.
n General
Power source AC 120 V, 60 Hz
Power 30 W
consumption
Power stand-by: 0.4 W (*)
Dimensions
Width: 155 mm
Height: 178 mm
Depth: 243 mm
Weight 2.20 kg
( * ) This power consumption value is obtained when the
main unit is in stand-by mode without iPod charging.
n Amplifier
Output power RMS: 24 W (12 W + 12 W) (10% T.H.D.)
Output Speakers: 6 ohms
terminals
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Input terminals AUDIO/LINE IN (Analogue input):
500 mV/47 k ohms
n CD player
Type
Single disc multi-play compact disc
player
Signal readout Non-contact, 3-beam
semiconductor laser pickup
D/A converter Multi bit D/A converter
Frequency 20 Hz to 20,000 Hz
response
n USB
USB host interface
Support file
Bitrate support
Other
File system
support
n Tuner
Frequency range
n Speaker
Type
Maximum input
power
Rated input power
Impedance
Dimensions
Weight
En-22
l Complies with USB 1.1 (Full
Speed)/ 2.0 Mass Storage Class.
Support Bulk only and CBI
l
protocol.
l MPEG 1 Layer 3
l WMA (Non DRM)
l MP3 (32 kbps to 320 kbps)
WMA (64 kbps to 160 kbps)
l
Maximum total number of MP3/
l
WMA files is 65280.
l Maximum total number of folders
is 255 INCLUSIVE of root directory.
The ID3TAG information supported
l
are TITLE, ARTIST and ALBUM
only.
l Supports ID3TAG version 1 and
version 2.
Support USB devices with
l
Microsoft Windows/DOS/FAT 12/
FAT 16/ FAT 32.
l 2 kbyte block length for sector.
FM: 87.5 MHz to 108 MHz
AM: 530 kHz to 1,710 kHz
2-way 2-speaker system
5 cm tweeter
10 cm woofer
24 W
12 W
6 ohms
Width: 132 mm
Height: 260 mm
Depth: 171.5 mm
1.98 kg/each