Timer And Sleep Operation - Pioneer X-CM30 Operating Instructions Manual

Timer and sleep operation (Remote control only)
Timer playback:
The unit turns on and plays the desired source (CD, TUNER,
USB, iPod) at a preset time.
TUNING/
FOLDER
n Timer playback
Before setting timer:
1
Check that the clock is set to the correct time (refer to
page 9).
If it is not set, you cannot use the timer function.
2
For timer playback, load the disc to be played back.
1
Press the STANDBY/ON button to turn the power on.
2
Press the CLOCK/TIMER button for about 2 seconds.
3
Within 10 seconds, press the CLOCK/TIMER button.
4
Press the
CLOCK/TIMER button.
5
Press the
press the CLOCK/TIMER button.
6
Switch input with the
OFF" and then press the CLOCK/TIMER button.
7
Press the
the CLOCK/TIMER button.
8
Press the
press the CLOCK/TIMER button.
9
To select the timer playback source, switch input with
or button to select "SOURCE", then press the
CLOCK/TIMER button.
En-18
or button to set hour then press the
or button to set minute and then
or button to select "TMR-
or button to set hour and then press
or button to set minute and then