Table of Contents
Advertisement
Water Connections continued-
Lowboy Models (See Figures 2A & 2B)
The hot and cold-water connections are identified on the top of the
water heater (See figure 2A). For bottom inlet models, the cold-water
inlet is located on the side of the drain valve (see figure 2B). Connect
the hot and cold-water lines to the installed nipples using unions.
Install a listed temperature-pressure relief valve in the opening on the
side of the water heater.
Figure 2A (Top Inlet Models)
Figure 2B (Bottom Inlet Models)
11
Hide quick links:
Advertisement
Table of Contents
