Sanyo PLC-XD2200 Owner's Manual page 31

Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
yes. All adjustments will return to their previous figures.
Mode free
To clear the stored data, select Mode free and then press
the Point or the SELECT button. Move the highlight to the
►
Mode that you want to clear and then press the SELECT
button.
Store
To store the adjusted data, select Store and then press the
Point or the SELECT button. Move the highlight to one
►
of the Modes 1 to 10 in which you want to store, and then
press the SELECT button.
✔Note:
• Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 720p, 105i or 1080i is selected in the
PC System Menu (p.28).
• When input computer signal to the projector, PC adjust will become available.
Mode free
Auto PC adj.
Fine sync
►
Total dots
Horiznotal
Vertical
Current mode
Clamp
Display area H
Display area V
Reset
Mode free
Store
This Mode has stored
parameters.
Mode 1
►
Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
Mode 7
Mode 8
Mode 9
Mode 10
Values of Total dots, Horizontal,
Vertical, Display area H, and
Display area V.
Store
Store
Mode 1
►
Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
Mode 7
Mode 8
Mode 9
Mode 10
Press MENU button
to close this dialog
box.
Computer Input
0
1365
0
0
0
1024
768
►
Where to free?
Total dots 1344
Horizontal 255 0
Vertical 34 0
Display area H 1024
Display area V 768
Vacant
Where to store?
store?
Free
Total dots
Total dots 1344
0
Position H 0
Horizontal 255
0
Position V
Vertical 0 34
Display area H
Display area H 1024
Display area V
Display area V 768
Press SELECT button to
store the data.
1