Sanyo ICR-XPS01M Instruction Manual page 70

Tap +/– to select "ON" or "OFF", and then
6
tap .
OFF: Do not set up auto divide.
ON (Auto Stop):
The auto divide function activates when no
sound is detected for two seconds.
When no sound is detected for more than
two seconds, the unit pauses; when sound is
detected again, recording resumes.
When there is no sound for more than
15 seconds, recording ends.
ON (Manual Stop):
The auto divide function activates when no
sound is detected for two seconds.
When no sound is detected for more than
two seconds, the unit pauses; when sound is
detected again, recording resumes.
Even when there is no sound for more than
15 seconds, the unit still pauses; recording does
not end until you press the STOP button ( ).
• ON (Auto Stop) is good for line-in recording
from a CD. ON (Manual Stop) is good for line-in
recording from a cassette tape; even if there is
no sound for more than 15 seconds when you
change the tape from side A to side B, the unit
will pause.
• The auto divide function may not work in the
following cases: CD live album where silence is
less than 2 seconds, or where silence cannot be
detected when recording from a cassette tape
with intense noise or motor sound.
Tap MENU to exit the menu.
* When the auto divide function is "ON",
70
appears on the screen.