Sanyo ICR-XPS01M Instruction Manual page 177

(During built-in microphone
recording)
Format
Playback format
Playback frequency
Sampling frequency
Playback bitrate
Radio reception frequency
Input/output sockets
Operating temperature
Rated output (headphones)
(Speakers)
Power source
Charging time
Battery duration
(Recording time)
(Radio recording time)
(Recording environment)
: 60 to 20,000Hz (for PCM recording)
* The frequency upper limit of MP3 recording follows each recording
mode of external microphone recording. Also, the lower limit for each
recording mode is 60 Hz.
: MP3, PCM (WAV)
: MP3 (MPEG1 LAYER3, MPEG2 LAYER3, MPEG2.5 LAYER3), WMA,
PCM (only files recoded on the unit)
: 20 to 21,000Hz (for 44.1kHz sampling frequency)
: 16 to 44.1 kHz
: 16 to 320 kbps (MP3)
32 to 192 kbps (WMA)
* Depending on the file, normal playback may not be possible.
: [FM] 87.5 to 108MHz
: micro USB, stereo headphones mini-plug 3.5 , stereo microphone
(doubling as line input) mini-plug 3.5 , microSD card slot, Original I/O
terminal
: +5°C to +35°C
: 1.8mW + 1.8mW (when 16 load, SOUND EQ:FLAT)
10mW + 10mW (when 16 load, 10% THD)
: 120mW (when 170 load)
: Lithium-ion battery, AC power (USB, original I/O terminal)
: Approx. 150 minutes
: [MP3] 32kbps Mono mode
[MP3] 64kbps Stereo mode
[PCM] 44.1kHz 16bit
: [MP3] 128kbps
: (Power save mode)
When backlight is ON (power save), LED setting OFF, no recording
monitor, and ALC is ON
(Light off mode)
When backlight is OFF, LED setting ON, no recording monitor, and
ALC is ON
Approx. 20 hours (power save mode)
Approx. 40 hours (light off mode)
Approx. 19 hours (power save mode)
Approx. 36 hours (light off mode)
Approx. 14 hours (power save mode)
Approx. 23 hours (light off mode)
Approx. 12 hours (power save mode)
Approx. 16 hours (light off mode)
177