Bosch Professional GSR 18 V-EC TE Original Instructions Manual page 12

12 | English
Always wait until the power tool has come to a com-
u
plete stop before placing it down. The application tool
can jam and cause you to lose control of the power tool.
In case of damage and improper use of the battery, va-
u
pours may be emitted. Ensure the area is well-ventilated
and seek medical attention should you experience any ad-
verse effects. The vapours may irritate the respiratory
system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g.
against continuous intense sunlight, fire,
water and moisture. There is a risk of explo-
sion.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for screwing in and loosening
screws.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
A)
(1) Screwdriver bit
(2) Stop sleeve
(3) Adjusting sleeve for screw depth stop
(4) Screwing-depth stop
(5) Rotational direction switch
(6) Lock-on button for on/off switch
(7) On/off switch
(8) Belt clip
A)
(9) Battery
(10) Battery release button
(11) Handle (insulated gripping surface)
(12) LED to illuminate screwing location
1 609 92A 4PR | (19.10.2018)
A)
(13) Universal bit holder
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless screwdriver
Article number
Rated voltage
No-load speed
Maximum torque, soft screw-
driving application according
to ISO 5393
Tool holder
Max. screw diameter
Weight according to
EPTA-Procedure 01:2014
Permitted ambient temperature
– during charging
B)
– during operation and
during storage
Recommended batteries
Recommended chargers
Recommended chargers for
inductive batteries
A) Depends on battery in use
B) Limited performance at temperatures <0 °C
Noise/Vibration Information
Noise emission values determined according to
EN 62841-2-2.
Typically, the A-weighted sound pressure level of the power
tool is 75 dB(A). Uncertainty K = 3 dB. The noise level when
working can exceed 80 dB(A).
Wear hearing protection
Total vibration values a (triax vector sum) and uncertainty K
h
determined according to EN 62841-2-2:
Tightening screws and nuts of the maximum permissible
2 2
size: a <2.5 m/s , K=3 m/s ,
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure detailed in EN 62841
and may be used to compare power tools. They may also be
used for a preliminary estimation of vibration and noise
emissions.
The given vibration level and noise emission value represent
the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
GSR 18 V-EC TE
3 601 JC8 0..
V= 18
rpm 0–4200
Nm 5
¼" internal
hexagon
mm 4.2
A)
kg 1.3–1.8
°C 0 to +45
°C –20 to +50
GBA 18 V..
GBA 18V...W
AL 18..
GAL 3680
GAL18... W
Bosch Power Tools