Using The Action Button; Display Map; Action Control - Nikon COOLPIX AW100 Reference Manual

Basic Operations
Using the Action Button
When the action button is pressed, either of the
following operations set in Assign action button of
the setup menu (_94) can be performed.
• Display maps.
• Perform the function by shaking the camera (action
control).
Display map
Display the current location on a map during shooting
(only when Record GPS data in GPS options of the
map menu (_86) is set to On).
Display tile shooting location of an image on a map
during playback (only images on which )osition
information is recorded).
Action control
As shown in the illustration, use your wrist and shake the camera for a single up/
down or forward/backward stroke to perform the functions.
Action menu
In the action menu, you can select the following options by shaking the camera
u p/down or forward/bat kward.
• Shooting mode: You can select the Easy auto mode, Auto mode, Beach,
Snow, Landscape and Underwater modes.
• Start movie recording: Presstile action button to begin shooting. Presstile
button again to exit shooting.
• Quick playback: Display images in full-frame playback mode.
• Current position: Display the current location on a map (only when Record
GPS data in GPS options of the map menu (_86) is set to On).
Press tile action button to select tile flJnction.
o
o_
o
In Quick playback or full-frame playback mode, shake the camera up/down to
display the next image or forward/backward to display the previous image.
13