Panasonic DMR-HST270 Operating Instructions Manual page 62

Table of Contents

Advertisement

Play
You have forgotten your rating PIN.
• The rating level returns to the factory preset.
1 When the unit is on and no media is loaded
or inserted, press and hold [OK] and the
yellow and blue buttons simultaneously for
more than 5 seconds.
• "00 RET" is displayed on the front panel
display.
2 Repeatedly press [1] (right) until "03 VL" is
displayed on the front panel display.
3 Press [OK].
• "INIT" is displayed on the front panel display.
Image for the Quick View is not smooth.
• Image may not be played back smoothly in case
of high definition contents.
Edit
Cannot edit.
• You may not be able to edit on the HDD if there
is no available space. Delete any unwanted
programmes to create empty space. (
Photo
Photos do not play back normally.
• The images that were edited on the PC, such as
Progressive JPEG, etc., may not play back.
(
65)
USB
This unit does not recognise the USB device
correctly.
• If inserted during playback the USB device may
not be recognised by this unit.
Disconnect and reconnect the USB device. If it
still does not recognise the connection, switch
the unit to standby mode and turn it on again.
• USB devices connected using a USB extension
cable other than a dedicated one or a USB hub
may not be recognised by this unit.
• Two USB devices cannot be used
simultaneously. If you insert a USB device while
watching TV, the USB device detection screen
is displayed. Use this screen to select the
device you want to use.
62
TQBS0165
TV Guide
The TV Guide information is not displayed
properly.
• Set the clock correctly. (
• There was a programme change, or TV Guide
information from a broadcast station was
possibly not correctly transmitted.
• If signal quality is bad, the TV Guide system
may not be able to receive any data.
• It may take time until the TV Guide screen is
displayed correctly. Wait for about a day.
Broadcast
The channel which was once selectable
cannot be selected.
• Reveal the channel on the channel list. (
Digital broadcasts cannot be received.
• The dish may not be pointing in the direction of
the satellite. If problem persists consult your
local TV aerial installer.
35)
Picture very infrequently breaks up on some
or all channels.
• Electrical atmospheric interference caused by
bad weather may cause pictures to break up
and audio to mute or distort momentarily.
Network
You cannot access this unit from DLNA
compatible equipment on the network.
• Check the network connection and the network
settings. (
• It may not be possible to connect depending on
the types of the equipment or the status of the
equipment.
When using this unit as a server, video frames
are dropped.
• Change the following settings:
- Conversion Setting for DLNA (
- Resolution Setting for DLNA (
59, Clock)
10, 11)
57)
57)
52)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents