Panasonic DMR-HST270 Operating Instructions Manual page 58

Remote device list
• To register equipment manually
1 Select the device name or the MAC
Address for the device you want to
register, then press [OK].
2 Select "Yes", then press [OK].
• To deregister equipment
1 Select the registered equipment, then
press [OK].
2 Select "Yes", then press [OK].
• This function cannot be enabled when "Automatic"
is selected in "Registration type for remote
devices". ( 57)
• The maximum number of equipment that can be
registered is 16.
58
TQBS0165
Others
Standby Settings
Quick Start
• On:
It is possible to start quickly from standby
mode.
• Off:
Power consumption in standby mode is
minimised. ( 67)
However, startup time from standby mode
will be longer.
• Timer Setting for Quick Start:
"Quick Start" is activated when the set time
comes.
• If you set "Home Network function" (
Anytime" ( 57) to "On", the setting for "Quick Start" is
fixed to "On".
Automatic Standby
Set the time to turn the unit to standby mode
automatically.
When the unit is not operating, the unit will be
turned to standby mode once the set time has
passed.
Automatic Standby after OTR
• On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing "Automatic Stop" or
"Recording Time" (
Automatic Standby after Copy
• On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing copy (
programmes with copying list).
Power Save for Network Standby
You can minimise power consumption in
standby mode even when the "Quick Start"
function is activated. (
57) or "TV
17).
39, Copying
67)