Panasonic DMR-HST270 Operating Instructions Manual page 53

Update Channel List
You can update the channel list to the latest
one.
1 Select the method and settings.
2 Select "Start Tuning", then press [OK].
3 Select the region you live in, then press
[OK].
The unit starts searching for newly
available satellite digital channels.
Signal Condition
You can check the quality and strength of
signals.
Press [CH W X] to select the channel.
• The channels you can receive are affected by weather
conditions, seasons, time (day/night), region, length of
the cable that is connected to the aerial, etc.
• When the signal is too strong (red bar), reduce the
signal amplification at your aerial.
• When the signal is weak:
- adjust the position and direction of the dish.
- check that the current digital broadcast channel is
correctly broadcasting.
Antenna System
You can set the antenna system to use plural
LNBs for receiving several satellites.
• One LNB
Compatible with single LNB.
• Dual LNB
Up to 2 LNBs can be controlled.
• DiSEqC1.0
Up to 4 LNBs can be controlled.
After changing the setting, run Auto Setup.
( 52)
LNB Configuration
You can set LNB setting when necessary.
• If you do not know the connected satellite,
select "No Satellite" in "Satellite". (Available
satellite will be searched in Auto Setup.)
• If you select "Other satellite" in "Satellite",
set "Test Transponder Frequency" manually.
Dual Polarisation Mode
This setting should be changed in a case like
when Freeview broadcast operation is
changed.
Start Auto Setup again after this setting is
changed. ( 52)
Child Lock ( Parental Rating )
You can restrict the viewing of channels
unsuitable to children.
Set a ratings level to limit broadcast viewing and
playback.
• PIN is required to change. (
Preferred Language
Select the language for multi broadcast.
If the selected language is not available, the
original language will be selected.
Audio Description
(When Audio Description is available in the
programme)
When "Automatic" is selected, Audio Description
will be set as default while watching. When timer
recording and copying, Audio Description will be
recorded.
Freeview Guide
Turn on/off the Freeview Guide service.
• When "On" is selected, Freeview Guide
services are available.
14)
53
TQBS0165