Using The Monitor; Setting The Timing Mode; Osd Lock Settings - ViewSonic E92f+SB User Manual

Using the Monitor

Setting the Timing Mode

Setting the timing mode is important for maximizing the quality of the
screen image and minimizing eye strain. The timing mode consists of the
resolution (example 1280 x 1024) and refresh rate (or vertical frequency;
example 75 Hz). After setting the timing mode, use the OnView
to adjust the screen image.
For the best picture quality set your monitor timing mode to:
VESA 1280 x 1024 @ 75 Hz.
To set the Resolution:
Right-click on the Windows desktop.
1
Click Properties on the drop-down menu.
2
Click the Settings tab.
3
Move the slider pointer which displays in the Desktop area or Screen area in
4
the window.
NOTE: The refresh rate should already be set if you have done the CD
installation (or refer to your graphics card documentation).

OSD Lock Settings

You have the option of using the On Screen Display (OSD) locking feature,
OSD LOCK, to prevent unwanted changes to the current image settings.
• OSD Lock: Press and hold the [1] and [
for 5 seconds. The message "OSD LOCK" will then display briefly,
indicating that the OSD image settings are now locked.
• OSD Unlock: Press and hold the [1] and [
message "OSD UNLOCK" will then display briefly, indicating that the OSD
image settings are now unlocked.
▼
] buttons on the face of the monitor
▼
] buttons again for 5 seconds. The
ViewSonic
controls
®
5
E92f+