Table of Contents
Advertisement
Information
Input Source
Display the current input source.
Resolution
Display current input source resolution.
H. Frequency
Display current image horizontal frequency.
V. Frequency
Display current image vertical frequency.
Lamp Hours
Display the lamp's elapsed operating time (in hours).
Mac Address
Abbreviation for Media Access Control Address. Mac Address is a unique ID number
assigned to each network adapter.
Controlling the projector through a LAN environment
The projector supports Crestron® software. With correct settings for the Lan control
setting menu, you can manage the projector from a computer using a web browser
when the computer and the projector are properly connected to the same local area
network.
Configuring the Lan control setting
If you are in a DHCP environment:
1. Take a RJ45 cable and connect one end to the RJ45 LAN input jack of the
projector and the other end to the RJ45 port .
2. Press MENU/EXIT on the projector or Menu on the remote control and then press
until the Setting menu is highlighted.
/
3. Press
to highlight Lan control setting and press Enter on the remote control.
The Lan control setting page is displayed.
4. Press
to highlight DHCP and press
5. Press
to highlight Apply and press Enter on the remote control.
T Y P
E B
U S B
L A N
(An example of connection)
to select On.
/
28
R S -
2 3 2
Advertisement
Table of Contents
